How To Hang Outdoor String Lights?

Truly, outdoor string lights bring a magical glow to any space. Maybe you’re setting the mood for a celebration or simply creating a cozy corner to relax, these lights do wonders! Although hanging them is a simple project, it does take a bit of planning. You’ll need the right tools, a product that suits your vision, and a clear design in mind.

If you’re ready to transform your backyard, deck, or gazebo into a dreamy nighttime retreat, keep reading. In this guide, we’ve explained how to hang outdoor string lights from trees, your deck railing, and even on stucco, wood, and other surfaces.

You’ll also find out how to choose the best outdoor string lights and tips for maintaining them. There’s no better time to turn your outdoor area into a warm, inviting space for everyday use, special occasions, or outdoor events. Now, let’s go!

how to hang outdoor string lights

Hanging Outdoor String Lights from Trees

On how to hang string lights outside from the trees in your backyard, you’ll need: 

  • Drill
  • Patio lights
  • Lights hanging kit
  • Ladder with an extension
  • Lighting extension lead(optional)

Follow the steps below to hang your string lights from trees:

Step 1. Test the Lights

Before starting the installation, make sure the string lights are working properly. Plug them in to test each bulb but don’t forget to unplug them when you’re done to prevent any accidents during setup.

Step 2. Attach Lights to the Tree Trunk

To do this, start by attaching one end of the string lights to the tree trunk using outdoor clips or hooks. Make sure the attachment is strong enough to support the weight of the lights. Start from the base of the trunk, work your way up, and space the hooks evenly.

Step 3. Drape Lights Along the Branches

Once you've reached the branches, hang the lights loosely over them. You can follow the natural curves of the tree to give it a better look. Also, make sure the lights are evenly spaced to create a balanced look throughout the branches and at the tree's base.

Step 4. Secure the End and Connect to Power

When you’ve covered the branches, use clips or hooks to secure the end of the string lights. Then double-check all connections to be sure they’re secure. Finally, plug in the lights, following the manufacturer’s guidelines and you’re good to go!

how to hang outdoor string lights on trees

Hanging String Lights on Your Deck Railing

Hanging string lights on your deck railing is a simple yet effective way to create a cozy and inviting outdoor atmosphere. Before hanging string lights on your deck railing, you need the following tools:

  • string light poles
  • long zip-ties
  • impact driver or electric drill
  • scissors or knife
  • screws
  • brackets (for securing poles to the deck railing)

Then, follow the steps below to give your deck or patio a glowing look:

Step 1. Measure Your Space

Use a measuring tape to determine the length of the deck railing where you want to hang the lights. This will help you know how many strands of lights you'll need.

Step 2. Choose Your Hooks or Clips

Decide on the type of hooks or clips you will use. Cup hooks are sturdy and can be screwed directly into wood. Adhesive hooks are a good option if you prefer not to make permanent alterations. Cable clips can neatly secure the wiring to the railing.

Step 3. Install the Hooks or Clips

Space the hooks or clips evenly along the railing, about every 12 to 24 inches. Make sure they are secure and positioned to keep the string lights taut and aligned with the railing.

Step 4. Plan Your Power Source

Determine where your nearest power source is. If it’s not within easy reach, you’ll need an extension cord that is safe for outdoor use.

Step  5. Hang the Lights

Start at the power source and carefully drape or attach the string lights from one hook or clip to the next. Keep the string slightly taut to prevent excessive sagging. Wrap around posts or corners as needed.

Step 6. Secure the End

If there’s extra length at the end of your last hook or clip, you can wrap the lights back along the railing or neatly coil and tie the excess.

Step 7. Test Your Lights

Once everything is connected, turn on the lights to check that all bulbs are working and the overall effect is as desired.

how to hang outdoor string lights on deck railing

Hanging String Lights Outdoor on Stucco, Wood, and Other Surfaces

If you’re wondering how to hang string lights on stucco, wood, or other surfaces, while you can use adhesives, it’s not really guaranteed to last long because it can easily wear out.

So, if you’re going for a sturdier and longer-lasting setup, especially on tougher surfaces like stucco, drilling is the best option.

To get started, get these tools ready:

  • drill or masonry bit
  • measuring tape
  • pencil or chalk

Now, follow these steps to hang string outdoor lights securely without causing damage:

Step 1. Mark the Spots

Use a pencil or chalk to mark where you want to drill. This will help guide you as you work. With a masonry bit, drill small pilot holes at the marked spots. Keep the drill straight to avoid uneven angles.

Step 2. Insert Anchors

Choose anchors that are suitable for stucco, wood, or other surfaces, and gently tap them into the pilot holes. These will give your lights solid support.

Step 3. Attach Hooks

Now, screw the hooks into the anchors and make sure that they’re secure but not overly tight.

Step 4. Hang the Lights

Finally, drape your string lights over the hooks, step back, and enjoy your beautifully lit space.

The good thing about this method is that it works well for any surface, from stucco to wood, ensuring your lights are safely and stylishly hung.

how to hang outdoor string lights on other surfaces

Hanging Outdoor String Lights on Posts

When it comes to outdoor lighting, string lights hung on posts can transform your space into a beautifully lit oasis, ideal for gatherings or tranquil evenings. 

On hanging string lights outdoor on posts, the following tools are needed:

  • an electric screwdriver (optional)
  • hooks
  • measuring tape

Here’s the fixing process:

Step 1. Install the Posts

Secure your posts in the ground using concrete for permanence or in sturdy planters for a temporary setup. Ensure each post is vertically straight using a level.

Step 2. Attach Hooks or Eye Bolts

Install hooks or eye bolts at the top of each post. If using eye bolts, pre-drill holes to facilitate installation. Ensure they are securely fastened.

Step 3. Hang the Lights

Begin at the power source end and attach the string lights to the first post, then gently stretch them to the next, continuing until all lights are hung. Avoid overstretching to prevent damage.

Step 4. Adjust for Sag

Allow some slack between posts for a draped effect, adjusting the sag to achieve your desired aesthetic.

how to hang outdoor string lights on post

How to Choose the Best Outdoor String Lights?

If you want to pick the best outdoor string lights for your backyard, look out for these qualities:

  1. Look for removable bulbs as you can easily replace them if they burn out orif you want to switch colors/themes whenever you want to change the vibe.
  2. Choose shatterproof over glass bulbs, especially if you live in an area with rough weather.
  3. Also, opt for LED bulbs as they last longer, use less energy, and stay cool to the touch. A good example is the eufy outdoor string lights E10. They are a better choice for long-term outdoor or patio use compared to incandescent bulbs. 

  1. Additionally, go for string lights with heavy-duty wire gauges between 16-18 gauge, as they are thicker and more durable.
  2. Lastly, check the insulation rating of the lights and be sure they are safe and built to withstand outdoor conditions.

Tips for Maintaining Your Outdoor String Lights

If you want your outdoor string lights to last long, practice the following maintenance tips:

  1. Dust and clean the bubs regularly with a soft dry cloth.
  2. Use a damp cloth to clean the cables. This should be regular too.
  3. Always inspect the string lights for any signs of fraying, and replace the set if you find any.
  4. Immediately change or swap any broken or burnt-out bulbs as soon as you spot them. They can affect the whole string.
  5. Don’t use nails or stables to secure your lights. They can damage the cables. Outdoor clips or hooks are preferable.
  6. Take down the string lights when there’s heavy rain, snow, or a storm on the way.
  7. Finally, store the lights properly in a cool, dry place when not in use.

Conclusion

It’s time to pause on wondering how to hang outdoor string lights and get to work. These lights are not just a simple addition to your space; they create a warm, inviting atmosphere that brings people together. Take your time to install them thoughtfully with the right tools and supplies. Remember to take proper care of them so they can last long for you.

FAQs on How to Hang Outdoor String Lights

How do I prevent my outdoor string lights from sagging?

A simple solution is to use screwed-in eyelets to create a sturdy support system. Run a plastic-coated wire through these eyelets to hold your lights tight and prevent drooping. If you have trees nearby, consider starting and stopping the wire support there, as the tree can handle larger screw eyelets and adds a nice touch to your setup.

Can I leave string lights outside year-round?

Yes, you can leave string lights outside year-round if they are rated for outdoor use. Ensure they are weather-resistant and durable enough to withstand your local climate conditions, such as rain, snow, and UV exposure, to avoid damage and prolong their lifespan. For example, eufy outdoor string lights can last 50,000 hours and has an IP65 rating.

Do you need guide wire for string lights?

Think of a guide wire as extra support for your lights. A guide wire is a strong wire stretched between support points that help keep your lights straight and secure. It prevents drooping and protects them from strong winds or storms.

How to install temporary string lights?

Sometimes you may want to set up your outdoor lights as quickly as possible. In cases like this, you can achieve a temporary fix with adhesive hooks. They’re perfect for creating a temporary setup on trees, stucco, deck railings, or just about any surface.

Be the First to Know